DEPOSITION AND CHARACTERIZATION OF A-SI:H FILMS DOPED (N-TYPE OR P-TYPE)
DEPOSITION AND CHARACTERIZATION OF A-SI:H FILMS DOPED (N-TYPE OR P-TYPE)
Article Sidebar
How to Cite
Sarmiento Chávez, A. C., Moreno Moreno, M., Torres Jacacome, A., García Barrientos, A., & Plaza Casastillo, J. (2016). DEPOSITION AND CHARACTERIZATION OF A-SI:H FILMS DOPED (N-TYPE OR P-TYPE). Revista EIA / English Version, 12(2), 53–58. Retrieved from https://revista.eia.edu.co/index.php/Reveiaenglish/article/view/985
Published:
May 16, 2016
Section
Artículos
Licencia
Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-NoDerivativa 4.0 Internacional
Main Article Content
Ana Carolina Sarmiento Chávez
Mario Moreno Moreno
Alfonso Torres Jacacome
Abel García Barrientos
Jairo Plaza Casastillo
Abstract
Hydrogenated amorphous silicon (a-Si:H) is a promising material in the photovoltaic industry due to its high absorption coefficient and low manufacturing cost. The optical and electrical properties of a-Si:H doped p-type or n-type films were studied: transmittance, absorption coefficient, conductivity, activation energy, and thickness. The films were fabricated through plasma enhanced chemical vapor deposition (PECVD) at low frequency with a substrate temperature of 300°C by varying the flow of hydrogen and dopant gases. The characterization of the films was completed using electrical characterization techniques, optical transmission, and UV-visible ellipsometry. The results show that hydrogenated amorphous silicon is a good alternative for the manufacture of photovoltaic devices.
Article Details
Author Biographies
##ver##