Efecto del sistema de vulcanización en la red entrecruzada y en la reacción química de vulcanización del caucho natural
Efecto del sistema de vulcanización en la red entrecruzada y en la reacción química de vulcanización del caucho natural
Barra lateral del artículo
PDF
FLIP
Términos de la licencia (VER)
Declaración del copyright
Los autores ceden en exclusiva a la Universidad EIA, con facultad de cesión a terceros, todos los derechos de explotación que deriven de los trabajos que sean aceptados para su publicación en la Revista EIA, así como en cualquier producto derivados de la misma y, en particular, los de reproducción, distribución, comunicación pública (incluida la puesta a disposición interactiva) y transformación (incluidas la adaptación, la modificación y, en su caso, la traducción), para todas las modalidades de explotación (a título enunciativo y no limitativo: en formato papel, electrónico, on-line, soporte informático o audiovisual, así como en cualquier otro formato, incluso con finalidad promocional o publicitaria y/o para la realización de productos derivados), para un ámbito territorial mundial y para toda la duración legal de los derechos prevista en el vigente texto difundido de la Ley de Propiedad Intelectual. Esta cesión la realizarán los autores sin derecho a ningún tipo de remuneración o indemnización.
La autorización conferida a la Revista EIA estará vigente a partir de la fecha en que se incluye en el volumen y número respectivo en el Sistema Open Journal Systems de la Revista EIA, así como en las diferentes bases e índices de datos en que se encuentra indexada la publicación.
Todos los contenidos de la Revista EIA, están publicados bajo la Licencia Creative Commons Atribución-NoComercial-NoDerivativa 4.0 Internacional
Licencia
Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-NoDerivativa 4.0 Internacional
Contenido principal del artículo
Resumen
Descargas
Detalles del artículo
Referencias (VER)
Akay M., 2012. Introduction To Polymer Sciense And Technology. 1 St Ed. Mustafa Akay Ventus Publ. ApS.
Akiba, M., Hashim, A.S., 1997. Vulcanization and crosslinking in elastomers. Prog. Polym. Sci. 22, 475–521.
Akinlabi, A.K., Okieimen, F.E., Egharevba, F., Malomo, D., 2006. Investigation of the effect of mixing schemes on rheological and physico-mechanical properties of modified natural rubber blends. Mater. Des. 27, 783–788. doi:10.1016/j.matdes.2005.01.007
Allen, P.W., Bristow, G.M., 1963. The gel phase in Natural Rubber. J. Appl. Polym. Sci. 7, 603–615.
ASTM D3182, 2013. Standard Practice for Rubber — Materials , Equipment , and Procedures for Mixing Standard Compounds.
ASTM D5289, 2012. Test Method for Rubber Property--Vulcanization Using Rotorless Cure Meters. ASTM International.
B.I Gengrinovich, 1954. Calorific and thermal properties of natural rubber in the oriented and non-oriented states. Rubber Chem. Technol. 95, 571–574.
Blokh, G.A., Yaroshevich, A.G., 1957. The interaction between carbon black and sulfur during vulcanization. Proceeding Acadmey Sci. USSR Phys Chem Sect 116, 583–586.
Cerveny, S., Marzocca, A.J., 1999. Analysis of variation of molecular parameters of natural rubber during vulcanization in conformational tube model. II. Influence of sulfur/accelerator ratio. J. Appl. Polym. Sci. 74, 2747–2755. http://onlinelibrary.wiley.com/doi/10.1002/(SICI)1097–4628(19991209)74:11%3C2747::AID–APP22%3E3.0.CO;2–N/full.
Coran, A., 2013. 7 Vulcanization. Sci. Technol. Rubber 337.
Datta, R.., 2002. Rubber curing systems. iSmithers Rapra Publishing. http://books.google.com/books?hl=en&lr=&id=XoZa5t3_ogAC&oi=fnd&pg=PA3&dq=%22Evans,+Engelmann+%26+Buckham%22+%22Research+(Caswell)%22+%22%26+N+Technology+Ltd.+and+BIP+Chemicals%22+%22Coates+and+A.F.+Johnson,+IRC+in+Polymer%22+%22G.+Woods,%22+%22Kirby,+Du+Pont+(U.K.)%22+&ots=mu32fkpbF0&sig=Nr_6AjWksG7OtoVPaZOXFiogeYY.
Davies, B., 1986. Natural rubber—Its engineering characteristics. Mater. Des. 7, 68–74. http://www.sciencedirect.com/science/article/pii/S0261306986800048.
De Snaijer, H., Yuen, J., 2016. Handbook of styrene butadiene rubber. Scitus Acad. LLC.
Dick, J.S., 2011. Basic rubber testing selecting methods for a rubber test program. ASTM International, West Conshohocken, Pa.
Fernández, M.., Gonzáles, N., Mugica, A., Bernicot, C., 2006. Pyrolysis-FTIR and TGA techniques as tools in the characterization of blends of natural rubber and SBR. Thermochem. Acta 1, 65–70.
Ferry, J., Gee, G., Treloar, L.R.., 1945. The interaction between rubber and liquids. VII. The heats and entropies of dilution of natural rubber by various liquids. Rubber Chem. Technol. 19, 1–13.
Flory, P.J., 1942. Constitution of three dimensional polymers and the theory of gelation. J. Phys. Chem. 46, 132–140.
Flory, P.J., Rehner, J., 1943a. Statistical Mechanics of Cross-Linked Polymer Networks I. Rubberlike Elasticity. J. Chem. Phys. 11, 512. doi:10.1063/1.1723791
Flory, P.J., Rehner, J., 1943b. Statistical Mechanics of Cross-Linked Polymer Networks II. Swelling. J. Chem. Phys. 11, 521. http://link.aip.org/link/JCPSA6/v11/i11/p521/s1&Agg=doi. doi:10.1063/1.1723792
Franck, A., Hafner, K., Kern, W.F., 1962. The activation energy of vulcanization. Rubber Chem. Technol. 35, 76–91.
Gee, G., 1943. The interaction between rubber and liquids III. The swellingof vulcanized rubber in various liquids. Rubber Chem. Technol. 16, 263–267.
Gee, G., 1942. The interaction between rubber and liquids II. Thermodynamical basis of the swelling and solution of rubber. Rubber Chem. Technol. 15, 545–552.
Gradwell, M.H.S., Merwe, M.J., 1999a. Reaction of 2-t-butilbenzothiazole sulfenamida with sulfur and zinc oxide in the absence of rubber. Rubber Chem. Technol. 72, 55–64.
Gradwell, M.H.S., Merwe, M.J., 1999b. 2-t-butilbenzotiazole sulfenamide accelerated sulfur vulcanization of polyisoprene. Rubber Chem. Technol. 72, 65–73.
Hauser, E.A., Sze, M.C., 1942. Chemical reactions during vulcanization III. J. Phys. Chem. 46, 118–131.
Heideman, G., 2004. Reduced zinc oxide levels in sulphur vulcanisation of rubber compounds: mechanistic aspects of the role of activators and multifunctional additives. s.n.], S.l.
Heideman, G., Datta, R.N., Noordermeer, J.W.M., Baarle, B.V., 2004. Activators in accelerated sulfur vulcanization. Rubber Chem. Technol. 77, 512–541.
Heinrich, G., Straube, E., Helmis, G., 1988. Rubber elasticity of polymer networks: Theories. Adv. Polym. Sci. 85, 33–87.
Jarny, Y., 2000. SIMULTANEOUS ESTIMATION OF KINETIC PARAMETERS USING GENETIC ALGORITHMS, in: Inverse Problems in Engineering: Theory and Practice: Presented at the 3rd International Conference on Inverse Problems in Engineering, Theory and Practice, June 13-18, 1999, Port Ludlow, Washington. p. 263. http://www.me.ua.edu/3icipe/papers/paper61.pdf.
Kamal, M.R., Sourour, S., 1973. Kinetics and thermal characterization of thermoset cure. Polym. Eng. Sci. 13, 59–64.
Krishnan, S., 2015. Natural rubber latex filler masterbatch: preparation, processing and evaluation. Sch. Press.
Kuptsov, A.H., Zhizhin, G.N., 1998. Handbook of fourier transform Raman and Infrared spectra of polymers, Elsevier. ed.
Lloyd, D.G., 1991. Additives in rubber processing. Mater. Des. 12, 139–146. http://www.sciencedirect.com/science/article/pii/026130699190122K.
Loo, C.T., 1974. High temperature vulcanization of elastomers: 3. Network structure of efficiently vulcanized natural rubber mixes. Polymer 15, 729–737.
Mansilla, M.A., 2012. Influencia de la microestructura en las propiedades mecánicas y térmicas de mezclas de caucho natural y caucho estireno butadieno http://digital.bl.fcen.uba.ar/Download/Tesis/Tesis_5117_Mansilla.pdf.
Mansilla, M.A., Quasso, F., Marzocca, A.J., 2007. CARACTERIZACIÓN DE MEZCLAS VULCANIZADAS DE CAUCHO ESTIRENO BUTADIENO Y CAUCHO NATURAL http://www.materiales-org.ar/sitio/biblioteca/CONAMET-SAM2007/sam%20conamet%2007/pdf/T%C3%B3pico%2010%20-%20Materiales%20Polim%C3%A9ricos/10-14%20MansillaM%20(O).pdf.
Mark, J.E., Erman, B., Roland, M., 2013. The science and technology of rubber (4th ed.). Acad. Press.
Martinez Valdés, M., 2012. Financiamiento, insumo para las empresas productoras de hule natural: procedimientos, riesgos y requisitos para una dispersión de recursos financieros eficiente. Editor. Académica Esp.
Marzocca, A.J., 2007. Evaluation of the polymer–solvent interaction parameter χ for the system cured styrene butadiene rubber and toluene. Eur. Polym. J. 43, 2682–2689. http://linkinghub.elsevier.com/retrieve/pii/S0014305707001358. doi:10.1016/j.eurpolymj.2007.02.034
Marzocca, A.J., 2003. Relación entre la cinetica de formación de entrecruzamientos y las propiedades mecánicas de elastomeros vulcanizados. Presented at the Jornadas SAM/CONAMET/Simposio materia, pp. 886–889.
Marzocca, A.J., Cerveny, S., Raimondo, R.B., 1997. Analysis of the variation of molecular parameters of NR during vulcanization in the frame of the conformational tube model. J. Appl. Polym. Sci. 66, 1085–1092.
http://dipc.ehu.es/cerveny/index_htm_files/journal%20of%20polym%20sci%2066%20(1997)%201085.pdf.
Marzocca, A.J., Rodriguez Garraza, A.L., Sorichetti, P., Mosca, H.O., 2010. Cure kinetics and swelling behaviour in polybutadiene rubber. Polym. Test. 29, 477–482. http://linkinghub.elsevier.com/retrieve/pii/S0142941810000280. doi:10.1016/j.polymertesting.2010.02.008
Marzocca, A.J., Steren, C.A., Raimondo, R.B., Cerveny, S., 2004. Influence of the cure level on the monomeric friction coefficient of natural rubber vulcanizates. Polym. Int. 53, 646–655. http://doi.wiley.com/10.1002/pi.1378. doi:10.1002/pi.1378
Mayer, R., 1977. Organic Chemistry of sulfur, S. OAE. ed. Plenum Press, New York.
Morrison, N.J., 1984a. The reactions of crosslink precursors in natural rubber. Rubber Chem. Technol. 57, 86–96.
Morrison, N.J., 1984b. The formation of crosslink precursors in the sulfur vulcanization of natural rubber. Rubber Chem. Technol. 57, 97–103.
Morrison, N.J., Porter, M., 1984a. Temperature effects on the stability of intermediates and crosslinks in sulfur vulcanization. Rubber Chem. Technol. 57, 63–85.
Morrison, N.J., Porter, M., 1984b. Crosslinking of rubbers. Synth. Charact. React. Appl. Polym. G Allen Ed Pergamon Press 57, 115.
Mukhopadhyay, R., Bhowmick, A.K., De, S.K., 1978. Effect of vulcanzation temperature and synergism of accelerators on the network and technical properties of efficiently vulcanized natural rubber mixes. Polymer 19, 1176–1180.
Mukhopadhyay, R., De, S.K., 1977. Effect of vulcanization temperature and vulcanization systems on the structure and properties of natural rubber vulcanizates. Polymer 18, 1243–1249.
Nallasamy, P., Mohan, S., 2004. Vibrational spectra of cis-1,4-Polyisoprene. Arab. J. Sci. Eng. 1A, 17–26.
Ohio, A., 1994. The Science ot Rubber Compounding. Sci. End Technol. Rubber 419. http://books.google.com/books?hl=en&lr=&id=3DRBl2L_lgUC&oi=fnd&pg=PA419&dq=%22rubber+usage+has+increased+substantially+in+modern+radial%22+%22tire+for+a+radial+construction+compared+with+approximately+9+kg+found%22+%22consumption+is+virtually+in+line+with+the+gross+national+product%22+&ots=kr_H4i8Hx2&sig=lxuYlhqJGtxiwcTo8SU_bs1XRpE.
Ohm, R.F., 1990. The Vanderbilt Rubber Handbook, R.T Vanderbilt Company, INC. ed. Norwalk.
Peres, A.C., Lopes, L.M., Visconte, L.L., Nunes, R.C., 2006. Uso de DSC na determinaccão de parâmetros de vulcanizaccão de látex de borracha natural. Polim. Cienc. E Tecnol. 16, 61. http://www.scielo.br/pdf/po/v16n1/v16n1a13.pdf.
Pinchuk, L., Jurkowski, B., Kravtsov, A., Goldade, V., 2001. On some variations in rubber charge state during procesing. Eur. Polym. J. 37, 2239–2243.
Priyadarshan, P.M., 2017. Biology of hevea rubber. Springer.
Rabearison, N., Jochum, C., Grandidier, J.C., 2010. A cure kinetics, diffusion controlled and temperature dependent, identification of the Araldite LY556 epoxy. J. Mater. Sci. 46, 787-796. http://link.springer.com/10.1007/s10853-010-4815–7. doi:10.1007/s10853-010-4815-7
Roland, C.M., 2004. Naval applications of elastomers. Rubber Chem. Technol. 77, 542–551.
Saville, B., Watson, A.A., 1963. Structural characterization of sulfur vulcanizated rubber networks. Rubber Chem. Technol. 36, 547.
Shelton, J.R., McDonel, E.T., 1960. Investigation of radical and polar mechanisms in vulcanization reactions. Rubber Chem. Technol. 33, 342–356.
Urrego, W., Giraldo, D., Álvarez-Láinez, M., 2012. Análisis cuantitativo por FTIR y evaluación comparativa de la descomposición térmica de tres variedades de caucho natural Colombiano. Presented at the SLAP 2012 XIII Simposio latinoamericano de polímeros, Colombia.
Vergnaud, J.M., Rosca, I.-D., 2009. Rubber curing and properties. CRC Press/Taylor & Francis, Boca Raton. http://www.crcnetbase.com/isbn/978-1-4200-8522-8.
Villars, D.S., 1957. Studies on carbon black. III. Theory of bound rubber. Rubber Chem. Technol. 30, 157–169.
WHITE, J.L., 1994. Rheological Behavior and Processing ot Unvulcanized Rubber. Sci. End Technol. Rubber 257. http://books.google.com/books?hl=en&lr=&id=3DRBl2L_lgUC&oi=fnd&pg=PA257&dq=%22and+others,+many+long+forgotten.+It+was+not,+however,+until%22+%22%5BM40,+M41,+M46%5D+of+the+U.S.+Rubber+Company+(the+last+two+in%22+%22compounded+with+large+quantities+of+small+particles+exhibited+a%22+&ots=kr_H4i8Hx4&sig=wbyWW8O3l7XI7pHD0sElCv3SpYs.
Wren, W.G., 1960. The chemistry of natural rubber production. Rubber Chem. Technol. 12, 378–412.
Zapata, N.C.R., Osswald, T.A., Ortiz, J.P.H., 2012. CINÉTICA DE CURADO DE UN CAUCHO EPDM Y UNA RESINA EPOXÍDICA ALIFÁTICA. MODELAMIENTO Y ANÁLISIS SIN Y CON DIFUSIÓN. Rev. Iberoam. Polímeros 14, 6.